Sensor ALARM KEYPAD User Manual Page 1

SENSOR ALARM KEYPAD INSTALLATION AND USER MANUAL MNMSC0107_ALARMKEYPAD

MNMSC0107_ALARMKEYPAD: Alarm Keypad Installation and User Manual 10/11 In this example

MNMSC0107_ALARMKEYPAD: Alarm Keypad Installation and User Manual 11/11 APPENDIX A : T

MNMSC0107_ALARMKEYPAD: Alarm Keypad Installation and User Manual 2/11 TABLE OF CONTEN

1. INTRODUCTION. The Alarm Keypad is a powerful product which, when connected to an IC2000 or IC4000 controller, will allow a user to arm/disarm alar

3. SETTING UP THE SYSTEM. The Alarm Keypad is set up in three stages; RCB Installation (section 3.1), Alarm Keypad Wiring (section 3.2), and Software

3.3 Software Setup - Initial This stage may require some minor editing of a GuardPoint Pro software file. No programming or specialist knowledge is

3.4 Software Setup – GuardPoint Pro The Alarm Keypad set up works by activating and deactivating Alarm Zones, which are themselves defined by either

It is now time to integrate the Alarm Keypad with the controller, which is achieved by instructing certain readers to link to the panel. In our simpl

the Alarm Keypad has now armed the inputs of the relevant Alarm Zone. Note also that whilst armed, any door(s) controlled by the Alarm Zone’s reader(

5. ALARM ZONES. 5.1 Linking Zones It is not essential to link an Alarm Zone to a reader, although not doing so will obviously mean that readers wil